Products

Linear Abrasion Tester is mainly used to evaluate the abrasion resistance of materials through the reciprocating friction between the friction partner and the specimen, which causes abrasion on the surface of the specimen, and thus measures the mass loss or abrasion amount of the specimen within a certain period of time.

1. color touch screen control, Chinese and English double choice menu operation, simple and quick operation.
2. Three grades of pressure rate are available: 1KPa/min, 6KPa/min and 10KPa/min.
3. Six test units can be switched freely: Pa, Kpa, mmHg, cmH2O, PSI and Bar.
4. It can automatically identify and record the maximum value of sample rupture during the experiment.

1.Color touch screen control panel, Built-in English and Chinese menu for ease operation.
2.Adding pressure rate adjustable, 1-100 KPa/min
3.Seven test units can be selected: Pa, Kpa, mmHg, mmH2O, cmH2O, PSI, Bar.
4.Working modes: Supercharge method, Constant pressure and time, Constant pressure and timing, Leaking method, flexing test.
5.LED lighting of sample area.

1. Touch screen control, Chinese and English menus.
2. Built-in thermal printer.
3. Five test modes are optional.
4. Seven test units can be switched freely: Pa, kPa, mmHg, mmH2O, cmH2O, PSI, Bar.
5. Built-in professional LED lighting device.

Under standard atmosphere condition, use standard wrinkle device to add the predetermined load onto sample and keep for specified time. And then at the same atmosphere condition to adjust samples, compare it with reference photography to grade sample fabric’s appearance.

1. Built-in 10.1-inch industrial-grade microcomputer, recording temperature and differential heat curve graphs, automatic calculation of the initial and final melting temperature.
2. Dual temperature probes to ensure high repeatability of sample temperature measurement.
Can be connected to a printer to print melting point reports, support U disk export test charts.

1. While spray rating tester in stainless steel material is corrosion resistance and has long life service time.
2. Operate manually and easily.
3. Spray nozzle made according to standard requirement.

1. Comply with standards 16 CFR 1500.51~53, ASTM F963, EN71-Part 1, M&S P115A.
2. Manually operation, available to install various fixtures to grip samples.
3. This unit consists of a high precision force gauge, a firm stand and various grips. 
4. Calibration weight equipped for regular calibrate machine.
5. This device is durable with stable life service time.

Determine the water flow through the single layer of geotextile vertically under the specified conditions.