Products

1.Two and Four test stations available.
2.Viewing assessment cabinet needed.

3.Standard photographs needed.
4.Pre-mounted felt sleeves included.
5.Rotating cycle number can be preset. Machine will stop automatically when rotating cycles reached.
6.Length of chain is adjustable.

Mount sample into the fixture and hang on vertically inside test chamber. Burn the underneath of sample with specified height of flame for a certain of time, record the time of afterflame and smoldering, damaged length, so as to assess its flammability property.

Elmendorf tearing tester uses stable mechanical clamps, sample is fixed in the clamp and use the equipped blade to cut a crack, sample is torn along the crack direction by releasing the moveable clamp, convert the work and get value of tearing in a certain length to ballistic tearing strength.

1. Adopts high purity of aluminium alloy material and International streamline design.
2. Equipped with 4 pieces of Germany Imported blades, sharp and durable.
3. One piece of cutting mat equipped.

1.Equipped with standard rubbing fabric device.
2.Adopts single chip control with adjustable speed setting.
3.LCD display, membrane panel.
4.Freely set rubbing times, available for counting up and down. Automatically alarm when setting value reached.

1. Upper fixtures are driven by motor to do reciprocating motion with horizontal shaft. Downward moving angle is 22.5  0.5.
2.Flexing times can be set and real flexing times is display at real time.
3.Counter stop to count when reached preset test times and machine stop to work automatically.
4.12 or 24 working positions can be optional.
5.With manual location function.

Mount the specified sample onto the friction plate horizontally as standard required. The sample surface needed to test face down, applying certain load, use the method of horizontal pulling to pull the sample at a certain speed, measured its maximum tension, and calculate the static coefficient of friction, so as to measure sample’s static non-slip performance.

1.Automatic or manual adding water system, auto supplement water when lack of water, which ensure test will not be paused.
2.Temperature controller adopts digital display, PID control error ± 0.1 ° C.
3.Double over heat protection and alarm when lack of water to ensure safety usage.
4.Test chamber uses steam direct heating mode, ensure fast heating and uniform to reduce standby time.
5.Precision glass nozzle is available to adjust fog and amount of fog.