Products

1.6th Sense
2.Agitator
3.White porcelain drum
4.Lid lock
5.Dual suspension system 
6.Imbalance control 
7.Fabric softener dispenser
8.Bleach dispenser

1, the machine has compact structure, small bath ratio, PLC with touch screen control, the entire process automatic control, automatic High degree of transformation.
2, dyeing fluid circulation mode: by the corrosion resistant mixed flow pump with reversing device, according to the process needs to achieve positive and negative dyeing fluid Loop.
3, groove sealing form: silicone rubber O-type sealing ring.
4, equipped with pneumatic valve, master cylinder with flap type level controller, equipped with safety interlock mechanism, master cylinder with no Rust steel safety valve, manually open cover, and temperature control, can be set 85℃ safety protection.
5, dyeing liquid reversing control, computer automatic reversing control.
6, the main material: the selection of high-quality stainless steel plate production.

1.Configure special dyeing computer for dyeing machine;
2.Dyeing cylinder is made of SUS304 stainless steel;
3.Equipped with frequency converter and frequency conversion speed regulation;
4.Fill the lower cylinder with washing water;
5.Equipped with water level gauge and scale;
6.Equipped with feeding tank and feeding control valve;
7.energy-saving design, reduce the use cost, save power consumption;
8.Operation mode: with automatic operation and inching function;
9.The feeding drum is a round one;
10.Feeding control valve is inside the body;

1.Consists of rollers driving system, hydraulic compression system, cooling device for rollers, etc.
2.High precision heating system, accurate temp. & time control.
3.Emergency stop Equipped to protect the machine and operators.

It is composed of a pneumatic electric small padder and a saturated steam box unit. Normally, the saturated steam temperature is 102+/-1℃. continuous feeding and discharging of the cloth, and the cloth sample enters the steam box after passing through the liquid tank through the roller. Frequency conversion speed control, automatic setting through the steam box time, a one-time complete even pressure belt steam, can avoid the influence of air REDOX.Pad dyeing and reduction dyeing process VAT dyes.

Apply a certain amount of load on the drum, open the machine table to make the drum rotate, put the fabric end in the middle of two drums, the drum drives the fabric to roll, and at the same time remove the excessive moisture in the fabric.

It is on the basis of absorbing foreign small same type rolling cars combine the domestic current situation of the pad dyeing post-processing technology digestion renovation and become one of the most advanced pad dyeing small prototype.

1.Replace traditional oven to provide amount of, fast and flat dry test template, so as to reduce unnecessary waiting time for drying, and enhance color test efficiency.
2.Can be used for color fixation test after test samples came out from padding machine quickly, so as to determine whether the samples are abnormal.
3.Can be used as padding color fixation machine and printing dryer.
4.Can simulate and forecast color changing degree for resin process or drying dyestuff.
5.Can provide flat and correct test samples to enhance color test precision via computer and correct finished products and flat color sample.

Sample preparation (Needle plate shelf) - Automatic feedstock - Automatic count - Auto return of material and finish test.

1. The countertop adopts imported printing belt, which has excellent flatness, temperature resistance, corrosion resistance and anti-aging performance.
2. The squeegee force and squeegee speed can be controlled, with good reproducibility, and avoiding man-made scraping errors.
3. The squeegee method adopts electromagnet to attract the squeegee roller to press and roll, the magnetic force can be adjusted in sections, and the magnetic force value can be displayed.
4. The magnetic table is controlled by the frequency converter, the running speed can be adjusted, and the speed value can be displayed.
5. For different fabrics and pastes, different specifications of magnetic rods can be selected.

1. Use industrial camera imaging to automatically measure the distance between marking points, and use a dedicated visual inspection algorithm to automatically calculate fabric shrinkage.
2. Self-developed visual inspection algorithm and inspection system, fast inspection speed, simple and more user-friendly.
3. Can identify complex samples, and can adjust parameters to achieve higher accuracy.
4. Connect to a computer for operation, can store all test data and sample photos, convenient for query and printing.
5. The test process only takes 5 seconds to operate, making the test faster and effectively reducing labor costs.

1. The drum is made of stainless steel plate, which is durable and does not damage the material.
2. Electronic program control, automatic temperature control, low noise, fast heat exchange, and low energy consumption.
3. High-power heater, and an insulation layer is added to the outer cylinder, which heats up quickly and has high efficiency.
4. The delivery door is large, which is very convenient for throwing or taking things. The door is equipped with transparent glass, which can observe the drying of the internal fabric at any time, and is convenient for loading and unloading linens.
5. It adopts two-level triangular belt transmission, which runs smoothly, without vibration and noise.
6. The optimized transmission structure design not only ensures the durability of the machine, but also facilitates the maintenance of users.