Home
Fabric And Garment Testing
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Laboratory Melting Point Meter Automatic Melting Point Apparatus F027
Overview
Used for testing the melting point of chemical fiber, polyester chip, powder and other objects (except dark opaque objects).The melting point can be determined automatically by analyzing the heating curve and optical quantity change curve of the object in the heating process through instrument detection, or by visual observation of the microscope.
Application
Powder
Polyester chip
Chemical fiber
Key Parameters
|
Model |
F027 |
|
Melting point test range |
50 ~ 350 ℃, the measurement error of < 0.5 ℃, minimum temperature reading 0.1 ℃ heating speed 2, 5-tetrafluorobenzoic ℃ / min (optional) |
|
Report melting way |
Automatic report melting and manual report melting |
|
Output mode |
TPUP-16A micro-printer is adopted, which can print data of each test and arithmetic mean value of any time within 8 times. |
|
Power supply |
AC220V 50HZ |
|
Overall dimensions |
430 * 320 * 200mm |
Product Details
Product Details
Product Details
Product Details
Product Details
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
