Home
Nonwoven Textile Tester
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Lab Equipment Toilet Paper Drop Powder Rate Tester (Auto weigh) MB11B
Overview
Drop powder rate tester is to test sanitary products, especially toilet paper products drop powder amount of the instrument, the instrument according to the new standard "GB/ t20810-2018 toilet paper (including toilet paper base paper)" development.High degree of automation, easy to use, can effectively increase the laboratory testing efficiency, improve product quality.General life paper requirements paper soft, so in production after the blade wrinkle, use any raw material paper will have the same paper powder, only different degrees.Drop powder rate tester is used to test the paper powder of toilet paper products.
Application
Toilet paper
Standards
GB/T 20810-2018
Key Parameters
|
Model |
MB11B |
|
Reciprocating stroke |
(100±1)mm |
|
swing distance |
100±5mm |
|
Reciprocating frequency |
60--180r/min(adjustable) |
|
times of swing test |
2 ~ 999999 (optional) |
|
Motor |
AC speed motor 18W |
|
Power |
50W |
|
power supply |
AC 220V/50HZ |
|
Overall dimension |
550*388*700 |
|
Weight |
30Kg |
Product Details
Test chamber
Sample holder
Weighing Stands
Control Panel
Dust Box
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
