Fabric And Garment Testing

1.The machine is small and relatively light, with universal pulley at the bottom, easy to transport.
2.When carding samples, it is fast and convenient with less material.
3.This machine can be made in 220V or 380V according to customer's demand.

Ventilated type drying oven with the advantage of faster and more evenly heating up.
Come with precision balance with 1kg measuring range 1000g and 0.01 accuracy.
Chamber materials resistant to high temperature and durable with long lifetime.

1. High-precision mass balance module with an accuracy of 0.001g is adopted. The built-in calibration program can be used to calibrate the balance at any time.
2. The color touch screen display control is adopted, which is durable, convenient and simple to operate.
3. The test curve is displayed in real time during the experiment to better observe the quality change. The 6-station curve can be displayed simultaneously.
4. The test process can automatically weigh and display the sample weight, water evaporation, and real-time balance quality, which is convenient for observing the test process data.
5. The test weighing time interval can be set. The test will be automatically stopped when the water quality drops below 10% of the total water quality or the cumulative drying reaches the set time.
6. The 6-station balance module has independent testing, no interference with each other, and high efficiency.

1.Grading viewing board equip with 2 units of 2400mm or 1200mm length cold light sources.
2.Equip with switch control and high frequency power supply control devices.
3.Grading viewing board support to be mounted on the wall or sliding cart or customized.

Apply a certain amount of load on the drum, open the machine table to make the drum rotate, put the fabric end in the middle of two drums, the drum drives the fabric to roll, and at the same time remove the excessive moisture in the fabric.

1.Multi-reading feature allows auto-read, timed-read and continuous-read. 
2.Automatic/Manual temperature compensation ensures accurate results. 
3.Auto-hold feature senses and locks the measurement endpoint.
4.Data Storage 500 sets (GLP-compliant).
5.Support for USB or RS-232 communication.
6.IP54 waterproof.
7.1-5 points calibration with Standard Recognition.
8.Selectable pH buffer groups, including NIST, DIN, GB，USA，MERK
9.Automatic electrode diagnosis with pH slope and offset display.

1. Two working modes, suitable for different sample preparation needs.
2. The two cylinders of gas and oil are combined and pressurized to work quietly and without noise.
3. Multiple safety protections: two-hand button switch; infrared sensor; die installation status prompt; lower template installation status prompt; screen soft switch.
4. It can be connected to an external air compressor alone or to a centralized air supply device.
5. Pressurization speed and time are adjustable to adapt to the needs of different samples.
6. With the DM series die, samples of different sizes and sizes can be prepared.
7. Special cleaning air gun to prevent sample cross-contamination.
8. The initial angle and rotation angle can be set.

1、Unique rotary mechanism.
2、Colour touch screen display and control, Chinese and English interface, menu operation mode.
3、The core control components adopt 32-bit microcontroller from STMicroelectronics to form a multifunctional motherboard.
4, the friction head can be replaced, can meet the requirements of different test standards.
5、High sensitivity of the balance bar, the error generated on the specimen has been reduced to the extreme point.
6, equipped with a special specimen mounting bracket, convenient for customers to load samples.

1. Large color touch screen, Chinese and English menu operation interface.
2. Test mannequin that meets standard requirements, with adjustable standing angle and adjustable arm swing.
3. The rain shower system adopts a high-precision pump liquid control system.
4. The 25-channel humidity sensor collects signals and is connected to a special testing system to observe the wetness of the sample after being impacted by rain in real time.
5. The water tray adopts an electric transplanting device for quick response.
6. Modular frame design facilitates transportation, moving and installation.
7. Two temperature sensors measure the ambient temperature and the water temperature in the circular bathtub respectively.

1.High precision temperature sensor to ensure the accuracy of temperature measurement.
2.Power on automatic preheating heating plate and platform function, saving test time.
3.Automatically save the data after the test is completed, and you can view the report calculation, analyse the results and print the test report.
4.Touch screen control panel, clear image interface provides more convenient and fast operation for testers.
5. Infrared detection, you can choose manual/automatic test. Automatic testing eliminates errors caused by human testing.
6. Two test methods can be selected, the national standard and the day standard, the day standard test can be freely set the platform temperature.

1. High precision temperature sensor to ensure the accuracy of temperature measurement.
2. Automatic heating plate preheating function on power on to save testing time.
3. Automatically save the data after the test is completed, and you can view the report calculation, analyze the results and print the test report.
4. Touch screen control panel, clear image interface provides more convenient and fast operation for testers.
5. All data and statistical results can be freely accessed in the host.
6. Using 32-bit ARM processor, high sampling frequency, high testing accuracy.
7. infrared detection, you can choose manual/automatic test. Automatic testing eliminates the errors caused by human testing.

1, Large screen color touch screen display operation. Menu operation in English and Chinese.
2, The core components use the company's 32-bit multi-function motherboard to process data.
3, Test results: thermal resistance, Crow value, thermal conductivity, etc.
4, Built-in multiple standard test functions.
5, There is online software, the instrument can be tested on the computer, print, and print curves.